At present, the value of renewable resources that can be recycled and reused in my country is as high as 30 to 35 billion yuan each year. In Shanghai alone, an average of nearly 7,000 tons of domestic waste is removed every day, and recyclable resources such as plastics account for 28%. If all landfilled or incinerated, the annual loss will reach 68 million yuan. The extensive use of film edge material recycling machines can reduce the waste of resources. The film edge material recycling machine is mainly used in the film recycling equipment on the Liuting film production line and the film blowing unit. When the production line cuts off the two side materials, they are directly introduced into the machine and used to directly close the sides, fold, spin, and then cut into pellets, and the recycling is completed in an instant. It can be added and used immediately.
The advantages of the film edge material recycling machine are no heating, no dust, and very low noise. Therefore, the molecular structure of the plastic will not be destroyed, and it will not be plasticized again. Low power consumption. The specific gravity of the processed pellets is similar to that of the original pellets, which can be evenly mixed with the raw materials, is not easy to block the feed inlet, and is not easy to produce crystal points, and the addition amount can reach 30%-40%. This product is widely used in the recycling of PE, PO, PP, CPP, CPE, PA, EVA, PET, PTU, breathable film, stretch film, cling film, protective film, non-woven fabric, etc. The blown film unit is online and synchronized recovery, which greatly reduces the production cost compared with the crusher and the recycled material, improves the quality of the finished film, and can reduce the production cost by about 3%.
The edge material recovery machine is suitable for HTS-123 to use the film edge material 100% randomly (crushing and recycling) before the physical properties are not changed, aiming at thicker, wider, faster PP, PE, HIPE, LOPE, shrink film , PE cling film and other films, the processing object is the edge material with thickness below 0.06-1.2MM/width 100MM, using edge material recycling machine has the following advantages:
　　1. Improve the quality; from the production to the return of the side material into the screw rod, the side material is not oxidized, humidified and sucked in water vapor, pollution causes strength, stress, color, and gloss more, and the quality is naturally high.
　　2. Reduce costs; reduce inventory, labor, and management links, and the cost is of course low;
　　3. Save materials; reduce secondary processing, optimize the use of materials, and of course save raw materials.
　　4. Friendly environment; suitable for dust-free workshops, optimal manufacturing activities, no waste, less pollution, less labor, environmentally friendly and environmentally friendly.