1. The stretch film rewinding and slitting machine needs to cut the entire roll or the entire raw material to a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc. Use fixed-length slitting control.

2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate it by setting parameters.

3. The slitting control of the slitting rewinder is divided into static and dynamic slitting: it stops accurately when the set length is reached, then static slitting processing, and restarting after slitting; at the set length When it arrives, the slitting signal will not be stopped, and the slitting machine will dynamically slit and process the material during the movement.

Structural advantages of stretch film rewinder slitting machine:

The main shaft for processing paper tubes is installed in the middle of the stretch film rewinding and slitting machine. The front end of the main shaft is fixed on the base with a set of bearings. A pulley is installed in the middle of the set of bearings; a compression is installed near the base. A set of support rod bearings is installed on the upper end of the cylinder and the support rod of the cylinder to support the main shaft.

The main knife shaft is installed on the upper end of the stretch film rewinding and slitting machine, and a number of blades are arranged on it, and arranged according to a certain gap; the main knife shaft support frame is also set on the top of the slitting rewinder , A support cylinder is installed in the middle of the support frame.

The structural advantages of the slitter rewinder fill the technical gap of the automatic pipe cutting machine.